Products

This item ships direct from the manufacturer with delivery in 7-10 days.

Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).

The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude. 

The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.

Accuracy conforms to ANSI B40.1 Grade B and California regulation. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes. 

Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.

 CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.

This item ships direct from the manufacturer with delivery in 7-10 days.

Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).

The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude. 

The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.

Accuracy conforms to ANSI B40.1 Grade B and California regulation. Flexible 10 inch hose between gauge and chuck for hard-to-reach tire valves. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes. 

Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.

 CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.

This item ships direct from the manufacturer with delivery in 7-10 days.

Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).

The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude. 

The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.

Accuracy conforms to ANSI B40.1 Grade B and California regulation. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes. 

Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.

 CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov.

• Remarkable birch wood and metal instrument makes a variety of sounds similar to wild songbirds
• Keep the instrument dry; a small amount of the included powdered rosin, used occasionally, will renew the bird call's voice
• Total length approximately 2.5" x 0.75" wide
• Each bird call is handmade and individually tuned

Now the standard songbird call throughout the world, this birch wood and metal instrument will produce sounds which attract a variety of wild songbirds with a simple twist. The capsule contains powdered pine rosin. Apply rosin to the contact point between wood and metal to renew the call's voice. Keep the call the dry.

MADE BY HAND IN THE USA SINCE 1947

• eZpassClip mounts the new, small EZ Pass and I-Pass transponders without adhesives
• Switch your EZ Pass tag between cars or remove to avoid theft
• Easily remove the EZ Pass tag without removing eZpassClip holder
• Holds your EZ Pass tag at the correct angle for signal transmission
• High density UV-resilient plastic
• Proudly Made the USA

Your eZpassClip is made to fit the new style transponder and ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you are ready to go.

Dimensions: 5" x 2.25" x 1.25"
Weight: 0.5 ounces

Compatible with the new, smaller size toll tags from E-ZPass and I-Pass in the following states:

• Delaware
• Illinois
• Indiana
• Maine
• Maryland
• Massachusetts
• New Hampshire
• New Jersey
• New York
• North Carolina
• Ohio
• Pennsylvania
• Rhode Island
• Virginia
• West Virginia

• eZpassClip mounts the new, small EZ Pass and I-Pass transponders without adhesives
• Switch your EZ Pass tag between cars or remove to avoid theft
• Easily remove the EZ Pass tag without removing eZpassClip holder
• Holds your EZ Pass tag at the correct angle for signal transmission
• High density UV-resilient plastic
• Proudly Made the USA

Your eZpassClip is made to fit the new style transponder and ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you are ready to go.

Dimensions: 5" x 2.25" x 1.25"
Weight: 0.5 ounces

Compatible with the new, smaller size toll tags from E-ZPass and I-Pass in the following states:

• Delaware
• Illinois
• Indiana
• Maine
• Maryland
• Massachusetts
• New Hampshire
• New Jersey
• New York
• North Carolina
• Ohio
• Pennsylvania
• Rhode Island
• Virginia
• West Virginia

• Awarding-winning, patented and time-tested design
  
• Double-sided hammer head with steel points shatters vehicle windows in an emergency
• Protected razor-sharp blade to cut through a seat belt and free trapped passenger
• Includes mounting bracket with two options for mounting (screw or pin)
  
• Glows in the dark with additional fluorescent button for easy retrieval in the dark
• Made in the Netherlands
  

The LIFEHAMMER® Safety Hammer Classic GLOW is a high-quality automobile escape tool that glows in the dark for easy retrieval. It is designed to help prevent entrapment in your vehicle after an accident. Should power locks fail or safety belts jam, the double-sided hammer heads with hardened steel points are designed to allow the vehicle occupant to shatter side and rear windows, while a safely concealed razor-sharp blade cuts easily through safety belts. Includes newer mounting bracket with a florescent pin, which glows in the dark, and two options for mounting (screw or pin). Made in the Netherlands.

When quality counts
There are many inferior knockoffs on the market. These knockoffs have not been vigorously tested and may fail when you need them most. Do not compromise when it comes to the safety of yourself and your family. Buy the original, patented, tested and time-proven LIFEHAMMER® brand safety hammer.

About Life Safety Products B.V.
Located in the Netherlands, Life Safety Products B.V. is the manufacturer and sole distributor of the LIFEHAMMER® brand, the leading brand of innovative, high quality car safety products. LIFEHAMMER® branded products are “best in class” because they believe safety should never be compromised; only the best is good enough. By developing relevant, innovative, "best in class" products, Life Safety Products, B.V. wants to contribute to a safer life for motorists everywhere. The LIFEHAMMER® logo, wordmark and PLUS-SIGN® are registered trademarks of Life Safety Products B.V. All rights reserved.

• Awarding-winning, patented and time-tested design
  
• Double-sided hammer head with steel points shatters vehicle windows in an emergency
• Protected razor-sharp blade to cut through a seat belt and free trapped passenger
• Includes mounting bracket with two options for mounting (screw or pin)
  
• Glows in the dark with additional fluorescent button for easy retrieval in the dark
• Made in the Netherlands
  

The LIFEHAMMER® Safety Hammer Classic GLOW is a high-quality automobile escape tool that glows in the dark for easy retrieval. It is designed to help prevent entrapment in your vehicle after an accident. Should power locks fail or safety belts jam, the double-sided hammer heads with hardened steel points are designed to allow the vehicle occupant to shatter side and rear windows, while a safely concealed razor-sharp blade cuts easily through safety belts. Includes newer mounting bracket with a florescent pin, which glows in the dark, and two options for mounting (screw or pin). Made in the Netherlands.

When quality counts
There are many inferior knockoffs on the market. These knockoffs have not been vigorously tested and may fail when you need them most. Do not compromise when it comes to the safety of yourself and your family. Buy the original, patented, tested and time-proven LIFEHAMMER® brand safety hammer.

About Life Safety Products B.V.
Located in the Netherlands, Life Safety Products B.V. is the manufacturer and sole distributor of the LIFEHAMMER® brand, the leading brand of innovative, high quality car safety products. LIFEHAMMER® branded products are “best in class” because they believe safety should never be compromised; only the best is good enough. By developing relevant, innovative, "best in class" products, Life Safety Products, B.V. wants to contribute to a safer life for motorists everywhere. The LIFEHAMMER® logo, wordmark and PLUS-SIGN® are registered trademarks of Life Safety Products B.V. All rights reserved.