Featured collections
Featured products
-
G.H. Meiser
Accu-Gage "A-Series" Professional Tire Pressure Gauge, 60 PSI, Assembled in USA
$39.95
vG.H. Meiser
Accu-Gage "A-Series" Professional Tire Pressure Gauge, 60 PSI, Assembled in USA
$39.95
Visit product page →Accu-Gage "A-Series" tire pressure gauges are G.H. Meiser's top of the line, Assembled in USA gauges. They are fully tested and assembled in the USA from high quality domestic and imported components, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).
Internal Geared Movement: Switzerland
Brass Socket: Poland
Hose and Chuck Assembly: USA
Rubber Boot: TaiwanThe A-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude. Accuracy conforms to ANSI B40.1 Grade B and California regulation. Flexible 10 inch hose between gauge and chuck for hard-to-reach tire valves. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard.
Straight chuck is pictured here. Also available with angled swivel chuck or right angle chuck.
CALIFORNIA PROP 65 WARNING: This product and/or its packaging contain a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm.
-
G.H. Meiser
Accu-Gage "M-Series" Professional Tire Pressure Gauge, 60 PSI, Angled Swivel Chuck, Made in USA
$79.95
vG.H. Meiser
Accu-Gage "M-Series" Professional Tire Pressure Gauge, 60 PSI, Angled Swivel Chuck, Made in USA
$79.95
Visit product page →This item ships direct from the manufacturer with delivery in 7-10 days.
Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).
The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude.
The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.
Accuracy conforms to ANSI B40.1 Grade B and California regulation. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes.
Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.
CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov. -
G.H. Meiser
Accu-Gage "M-Series" Professional Tire Pressure Gauge, 60 PSI, Made in USA
$79.95
Visit product page →This item ships direct from the manufacturer with delivery in 7-10 days.
Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).
The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude.
The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.
Accuracy conforms to ANSI B40.1 Grade B and California regulation. Flexible 10 inch hose between gauge and chuck for hard-to-reach tire valves. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes.
Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.
CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov. -
G.H. Meiser
Accu-Gage "M-Series" Professional Tire Pressure Gauge, 60 PSI, Straight Chuck, Made in USA
$79.95
vG.H. Meiser
Accu-Gage "M-Series" Professional Tire Pressure Gauge, 60 PSI, Straight Chuck, Made in USA
$79.95
Visit product page →This item ships direct from the manufacturer with delivery in 7-10 days.
Accu-Gage "M-Series" tire pressure gauges are G.H. Meiser's top of the line, Made in USA gauges. They are fully manufactured, tested, and assembled in the USA, and backed by G.H. Meiser's Lifetime Warranty (USA and Canada).
The M-Series have a larger 2 1/2 inch dial and fully geared, precision movement with bronze Bourdon tube, which, unlike piston-plunger type gauges, is not affected by changes in temperature, humidity, or altitude.
The M-Series case is made of Zytel®, the same material used in football helmets and industrial applications. It is a heavy duty plastic (nylon resin) made by Dupont™, and considerably thicker and stronger than the metal case ordinarily used in tire gauges.
Accuracy conforms to ANSI B40.1 Grade B and California regulation. Heavy-duty polished brass stem and pressure release valve assembly. Needle holds pressure reading until released. Push-button valve bleeds air to desired pressure. Protective rubber guard. The included pouch is made in the USA from recycled bicycle inner tubes.
Zytel® and DuPont™ are registered trademarks and trademarks of DuPont de Nemours, Inc.
CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov. -
American Bird Products
Audubon Bird Call Gift Box
$10.95
Visit product page →- Remarkable birch wood and metal instrument makes a variety of sounds similar to wild songbirds
- Keep the instrument dry; a small amount of the included powdered rosin, used occasionally, will renew the bird call's voice
- Total length approximately 2.5" x 0.75" wide
- Each bird call is handmade and individually tuned
Now the standard songbird call throughout the world, this birch wood and metal instrument will produce sounds which attract a variety of wild songbirds with a simple twist. The capsule contains powdered pine rosin. Apply rosin to the contact point between wood and metal to renew the call's voice. Keep the call the dry.
MADE BY HAND IN THE USA SINCE 1947
-
NuCorp17
eZpassClip EZ Pass Holder, Black
$7.95
Visit product page →- eZpassClip mounts the new, small EZ Pass and I-Pass transponders without adhesives
- Switch your EZ Pass tag between cars or remove to avoid theft
- Easily remove the EZ Pass tag without removing eZpassClip holder
- Holds your EZ Pass tag at the correct angle for signal transmission
- High density UV-resilient plastic
- Proudly Made the USA
Your eZpassClip is made to fit the new style transponder and ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you are ready to go.
Dimensions: 5" x 2.25" x 1.25"
Weight: 0.5 ouncesCompatible with the new, smaller size toll tags from E-ZPass and I-Pass in the following states:
- Delaware
- Illinois
- Indiana
- Maine
- Maryland
- Massachusetts
- New Hampshire
- New Jersey
- New York
- North Carolina
- Ohio
- Pennsylvania
- Rhode Island
- Virginia
- West Virginia
-
Life Safety Products B.V.
LIFEHAMMER®
SAFETY HAMMER EVOLUTION
w/ Quick Click Mounting BracketSold out
vLife Safety Products B.V.
LIFEHAMMER®
SAFETY HAMMER EVOLUTION
w/ Quick Click Mounting Bracket$19.95
Visit product page →- Ultra-hard, spring-loaded ceramic hammerhead will automatically shatter vehicle windows and reload for reuse
- Includes Quick Click System to mount the Safety Hammer EVOLUTION quickly and easily
- Protected razor-sharp blade to cut through a seat belt and free trapped passenger
- Non-slip grip conical shaped handle
- Awarding-winning design is patented worldwide
PDF: LIFEHAMMER® EVOLUTION BROCHURE
-
Life Safety Products B.V.
LIFEHAMMER®
SAFETY HAMMER PLUS
w/ Quick Click Mounting Bracket$18.95
Visit product page →- Double-sided head with hardened steel points shatters vehicle windows in an emergency
- Includes Quick Click System to mount LIFEHAMMER® PLUS in any position within seconds
- Protected razor-sharp blade to cut through a seat belt and free trapped passenger
- Non-slip grip conical shaped handle
- Awarding-winning design is patented worldwide
PDF: LIFEHAMMER® SAFETY HAMMER PLUS BROCHURE
-
STABIL
STABILicers WALK
Black$21.95
Visit product page →-
Aggressive cleats and tread provide unbeatable traction – day in and day out. STABILicers Walk is easy to pull on and take off, with secure fitting for shoes and boots.
- Full foot slip protection with heel and forefoot cleats maintains traction throughout your natural stride while walking.
- Lightweight TPE Elastomer holds STABILicers Walk securely in place.
- Traction tread outsole and cleats simultaneously contact walking surface, providing superior grip on ice, snow, and pavement.
- Multi-directional, heat-treated steel plates bite into ice and snow.
Quick accessible traction for workers on the move. With aggressive cleats and tread, STABILicers Walk ice cleats provide unbeatable grip. Ideal for city workers, postal carriers, delivery workers, and anyone that spends their days outside on their feet.
STABILicers Walk's non-replaceable multi-directional steel cleats bite into ice and snow allowing you to stride naturally through winter's worst conditions. Made from the same Elastomer as the STABILicers Run ice cleats, the Walk is easy to pull on and take off, while securely fitting both shoes and boots. And the Walk rolls up nicely and is small enough to be carried in a purse or workbag. Keep a pair on hand and don’t let winter catch you off guard.
-
Size Chart
View the size chart below to find the right fit. If you are on the cusp between sizes below, please "up-size" if you plan to wear with boots. For example, if you wear a Men's size 10, choose a size Medium if you plan to wear with shoes, or a size Large if you plan to wear with boots.
SIZE MEN WOMEN EU SM 4-7 5-8 35-39 MD 7.5-10 8.5-12 40-43.5 LG 10.5-13 44-47 XLG 13.5-16 48-50
-
CALIFORNIA PROP 65 WARNING This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. 
